![]() This is configured for 10/100Mbps copper to 100Mbps fiber and is set to IEEE 802.3 and 802.3u standards. 10/100Base-TX to 10/100Base-FX Ethernet media converters: This type converts Ethernet or Fast Ethernet electrical signals to light signals that can be sent over a multimode fiber cable.These are 10/100/1000 media converters for single as well as multimode networks that support a distance of up to 100km. Gigabit Ethernet media converter with fiber:This type converts 10/100Base or 1000Base Ethernet to 1000Base Gigabit speeds over fiber.10/100Base Ethernet media converters: These are double duty connectors that convert 10/100Base Fast Ethernet UTP electrical signal into light signals, and are suited for single mode as well as multimode networks.Here are some types of Ethernet media converters. These types are classified on the basis of their configuration, data rate, and speed. What Are the Types of Ethernet Media Converters? It has two types of ports – RJ45 port for connecting to copper cable connectors and SFP port for connecting to fiber optic cable connector. Any blended network needs at least two media converters installed at two ends. This device interprets and converts electrical signals to light pulses and vice versa and sends them over a cable. ![]() This is ideal for blended networks such as legacy copper cable network with fiber optics. Fiber Optic Network switches are used for data transfer from one device to the other, without interrupting any other devices in the network.Īn Ethernet media converter is a device that is able to support communications between two different types of network media or two dissimilar networks. Also, instead of a twisted pair cable, a normal network cable is used in this case.
0 Comments
Leave a Reply. |